Starter Torque Limiter / Starter Clutch Removal And Installation - Suzuki VLR1800 Service Manual

1I-11 Starting System:
Starter Torque Limiter / Starter Clutch Removal
and Installation
Removal
1) Drain engine oil.
2) Remove the left foot rest (1) along with the gear shift
lever. Refer to "Gearshift Lever Removal and
Installation in Section 5B (Page 5B-14)".
3) Remove the generator cover (2). Refer to "Generator
Removal and Installation in Section 1J (Page 1J-5)".
4) Remove the starter torque limiter (3), idle gear shaft
(4) and starter idle gear (5).
5) Remove the generator rotor assembly (6). Refer to
"Generator Removal and Installation in Section 1J
(Page 1J-5)".
3
4
5
B822H11906009
1
I822H1190026-02
2
I822H1190027-02
6
I822H1190028-02
6) Remove the key (7) and starter driven gear (8).
7
7) Hold the generator rotor and remove the starter
clutch bolts.
8) Remove the one way clutch (9) from the guide (10).
8
I822H1190029-02
I822H1190030-01
10
9
I822H1190031-03