Suzuki FL125S Service Manual page 92

3-55 ENGINE
RIGHT CRANKCASE BEARING INSTALLATION
• Install the right crankcase bearings with the special tool.
& 09913-70210: Bearing installer set
Bearing 1: (47 Attachment
Bearing 2: (62 Attachment
Bearing 3: (30 Attachment
Bearing 4: (40 Attachment
Bearing 5: (15 Attachment
Bearing 6: (30 Attachment
NOTE:
When installing bearing, stamped mark on bearing must face
outside.
#
The removed bearings must be replaced with new
ones.
• Apply a small quantity of THREAD LOCK "1322" to the bear-
ing retainer screw.
+ 99000-32050: THREAD LOCK "1322"
• Install the bearing retainer 7 and tighten its screw securely.
LEFT CRANKCASE BEARING INSTALLATION
• Install the left crankcase bearings with the special tool.
NOTE:
When installing bearing, stamped mark on bearing must face
outside.
#
The removed bearings must be replaced with new
ones.
& 09913-70210: Bearing installer set
Bearing 1: (47 Attachment
Bearing 2: (62 Attachment
Bearing 3: (40 Attachment
Bearing 4: (15 Attachment