Suzuki FL125S Service Manual page 100

3-63 ENGINE
• Install the crank balancer driven gear 6.
NOTE:
Align the matching marks A as shown.
• Holding the crank balancer driven gear with the special tool,
tighten the crank balancer driven gear nut 7 to the specified
torque.
& 09930-44570: Crank balancer holder
" Crank balancer driven gear nut: 40 N·m (4.0 kgf-m)
OIL PUMP
• Install the dowel pins 1.
• Install the oil pump 2 and tighten the oil pump mounting bolt
3 and gearshift pin bolt 4 to the specified torque.
" Oil pump mounting bolt: 10 N·m (1.0 kgf-m)
Gearshift pin bolt: 23 N·m (2.3 kgf-m)
• Install the oil pump drive gear 5 and washer 6.