Suzuki FL125S Service Manual page 185

SPROCKET DRUM
• Apply SUZUKI SUPER GREASE "A" to the sprocket drum
bearing before installing.
* 99000-25010: SUZUKI SUPER GREASE "A"
• Install the sprocket drum bearing 1 with the special tool.
& 09913-70210: Bearing installer set
NOTE:
The stamped mark side of the gearshift cam bearing faces out-
side.
#
The removed bearing must be replaced with a new
one.
• Install the oil seal 2 with the special tool.
& 09913-70210: Bearing installer set
• Apply SUZUKI SUPER GREASE "A" to the oil seal lip.
* 99000-25010: SUZUKI SUPER GREASE "A"
#
The removed oil seal must be replaced with a new one.
REAR SPROCKET
• Tighten the rear sprocket nuts 1 to the specified torque.
" Rear sprocket nut: 27 N·m (2.7 kgf-m)
• Bend up the lock washer tongues 2 positively to lock the
nuts.
NOTE:
The stamped mark A on the rear sprocket must face to the out-
side.
CHASSIS 5-48
/ /