Suzuki FL125S Service Manual page 115

• Install the camshaft sprocket 3.
• Engage the cam chain onto the camshaft sprocket with the
mark C at just top position.
• Align the mark C of the cam sprocket with the concave line D
of the cylinder head.
• Install the spring 4, plastic washer 5 and decomp. cam 6
as shown.
• Hook the part E of the spring onto the decomp. cam and fit
the part F to the slit of plastic washer and hole of the cam
sprocket 7.
#
Turn the spring 4 and decomp cam 6 counterclock-
wise to install them.
• Turn the decomp. cam 6 counterclockwise and install the
decomp. cam stopper 8.
• Tighten the camshaft sprocket bolts to the specified torque.
" Camshaft sprocket bolt: 11 N·m (1.1 kgf-m)
CAM CHAIN TENSION ADJUSTER
• Apply engine oil to the push rod.
• Retract the push rod with a - screwdriver by turning it clock-
wise.
ENGINE 3-78