Suzuki FL125S Service Manual page 107

GEARSHIFT LINK
• Install the gearshift shaft assembly 1 and roller 2.
• Install the spring 3, gearshift link arm No. 2 4, washer 5
and release ball 6.
NOTE:
Face the lug A of the release ball 6 to the outside.
• Install the release ball outer guide 7, spring 8 and washer
9.
CLUTCH COVER
• Install the dowel pins 1 and gasket 2.
#
The removed gasket must be replaced with a new one
to prevent oil leakage.
• Install the clutch cover and tighten its bolts to the specified
torque.
" Clutch cover bolt: 10 N·m (1.0 kgf-m)
ENGINE 3-70