Suzuki FL125S Service Manual page 366

8-91 FL125SDW
Regulator/rectifier
• Remove the frame covers, left and right. (#5-7)
• Disconnect the regulator/rectifier coupler.
• Remove the regulator/rectifier.
Measure the voltage between the terminals using the multi cir-
cuit tester as indicated in the table below. If the voltage is not
within the specified value, replace the regulator/rectifier with a
new one.
$ 09900-25008: Multi circuit tester set
, Tester knob indication: Diode test (-)
+ Probe of tester to:
Y
1
Y
1
✽
Y
2
✽
Y
3
R 0.4 – 0.7 0.4 – 0.7 0.4 – 0.7
✽
B/W
✽ More than 1.4 V (tester's battery voltage)
Above are approximate values for reference purpose.
NOTE:
If the tester reads under 1.4 V when the tester probes are not
connected, replace the battery of multi circuit tester.
Y R
Y
3
2
✽ ✽ ✽
✽ ✽
✽ ✽
✽ ✽ ✽
R
Y Y
1 2
Unit: V
B/W
0.4 – 0.7
0.4 – 0.7
0.4 – 0.7
0.5 – 1.2
B/W
Y
3