Caliper Installation - Suzuki FL125S Service Manual

Table of Contents

Advertisement

5-21
CHASSIS
• Install the pad spring 1.
• Install the brake pads 2.
• Temporarily tighten the brake pad mounting pin bolts 3.

CALIPER INSTALLATION

Install the caliper in the reverse order of removal. Pay attention
to the following points:
• Tighten the brake caliper mounting bolts 1 to the specified
torque.
" Brake caliper mounting bolt: 25.5 N·m (2.55 kgf-m)
• Tighten the brake pad mounting pin bolts 2 to the specified
torque.
" Brake pad mounting pin bolt: 17.5 N·m (1.75 kgf-m)
• Install the brake hose union bolt 3 with the front brake hose
washers 4.
• With the hose and washer contacted to the stopper 5, tighten
the brake hose union bolt 3 to the specified torque.
" Brake hose union bolt: 22.5 N·m (2.25 kgf-m)
#
* The removed front brake hose washers must be
replaced with new ones to prevent brake fluid leak-
age.
* Bleed air from the system after reassembling the
front brake caliper. ($2-16)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fl125sdwFl125sd

Table of Contents