Suzuki FL125S Service Manual page 73

• Apply engine oil to the rocker arm shafts and rocker arms.
NOTE:
Face the thread part of the rocker arm shafts to the outside.
• Install the camshaft retainer 7.
VALVE CLEARANCE INSPECTION CAP
• Install the valve clearance inspection cap gasket 1.
#
The removed gasket must be replaced with a new one.
• Apply SUZUKI SUPER GREASE "A" to the valve clearance
inspection cap gasket.
* 99000-25010: SUZUKI SUPER GREASE "A"
• Tighten the valve clearance inspection cap bolts to the speci-
fied torque.
" Valve clearance inspection cap bolt: 10 N·m (1.0 kgf-m)
ENGINE 3-36