Suzuki FL125S Service Manual page 316

8-41 FL125SDW
DTC TABLE AND DEFECTIVE CONDITION
DETECTED
DTC No.
00 NO FAULT
CKP sensor
12
P0335
IAP sensor
13
H
P0105
L
TP sensor
14
H
P0120
L
ET sensor
15
H
P0115
L
IAT sensor
21
H
P0110
L
DETECTED FAILURE CONDITION
ITEM
The CKP sensor signal does not reach
ECM for 4 sec. or more, after receiving
the IAP sensor signal.
The sensor should produce following
voltage.
0.2 V sensor voltage < 4.5 V
In other than the above range, 13
(P0105) is indicated.
Sensor voltage is higher than specified
value.
Sensor voltage is lower than specified
value.
The sensor should produce following
voltage.
0.3 V sensor voltage < 4.7 V
In other than the above range, 14
(P0120) is indicated.
Sensor voltage is higher than specified
value.
Sensor voltage is lower than specified
value.
The sensor voltage should be the fol-
lowing.
0.1 V sensor voltage < 4.7 V
In other than the above range, 15
(P0115) is indicated.
Sensor voltage is higher than specified
value.
Sensor voltage is lower than specified
value.
The sensor voltage should be the fol-
lowing.
0.1 V sensor voltage < 4.6 V
In other than the above range, 21
(P0110) is indicated.
Sensor voltage is higher than specified
value.
Sensor voltage is lower than specified
value.
–––––––––––
CHECK FOR
–––––––––––
CKP sensor wiring and mechan-
ical parts.
CKP sensor, lead wire/coupler
connection.
IAP sensor, lead wire/coupler
connection.
IAP sensor circuit open or
shorted to VCC or ground circuit
open.
IAP sensor circuit shorted to
ground or VCC circuit open.
TP sensor, lead wire/coupler
connection.
TP sensor circuit shorted to
VCC or ground circuit open.
TP sensor circuit open or
shorted to ground or VCC circuit
open.
ET sensor, lead wire/coupler
connection.
ET sensor circuit open or ground
circuit open.
ET sensor circuit shorted to
ground.
IAT sensor, lead wire/coupler
connection.
IAT sensor circuit open or
ground circuit open.
IAT sensor circuit shorted to
ground.