Suzuki FL125S Service Manual page 190

5-53 CHASSIS
• Install the dust seal 1.
#
The removed dust seal must be replaced with a new
one.
• Install the camshaft 2.
• When installing the brake lining wear indicator plate 3, align
the tongue 4 on the brake lining wear indicator plate 3 with
the cutaway 5 on the brake camshaft.
• When installing the brake cam lever 6, align the punched
mark 7 on the brake camshaft with the punched mark 8 on
the brake cam lever 6.
• Tighten the brake cam lever nut 9 to the specified torque.
" Brake cam lever nut: 7.7 N·m (0.77 kgf·m)