Suzuki FL125S Service Manual page 70

3-33 ENGINE
CAMSHAFT BEARING INSPECTION
Rotate the camshaft bearing outer race by finger to check for
abnormal play, noise and smooth rotation.
Replace the bearings in the following procedure if there is any-
thing unusual.
CAMSHAFT BEARING REPLACEMENT
• Remove the camshaft bearing with the special tool.
& 09913-60910: Bearing & gear puller
• Remove the bearing with the special tool.
& 09921-20210: Bearing remover
09930-30104: Sliding shaft
• Press in the camshaft bearing to the camshaft with the special
tool.
& 09951-16080: Bearing installer ((49 mm)
#
The removed bearing must be replaced with a new
one.