Suzuki FL125S Service Manual page 50

3-13 ENGINE
• Remove the cylinder head nuts 2 in diagonally.
• Remove the cylinder head nut gaskets 3.
• Remove the cylinder head assembly 4.
NOTE:
If the cylinder head does not come off easily, lightly tap it with a
plastic mallet.
CYLINDER
• Remove the dowel pins 1, cylinder head gasket 2 and cam
chain guide 3.
• Remove the cylinder 4.
NOTE:
If the cylinder does not come off easily, lightly tap it with a plastic
mallet.
• Remove the dowel pins 5 and cylinder gasket 6.
PISTON
• Place a clean rag over the cylinder base to prevent the piston
pin circlip from dropping into the crankcase.
• Remove the piston pin circlip 1.
• Draw out the piston pin 2 and remove the piston 3.