Suzuki FL125S Service Manual page 358

8-83 FL125SDW
REMOVAL AND DISASSEMBLY
%
The throttle body is assembled precisely in factory. Do
not disassemble it other than shown in this manual.
• Remove the leg shields, left and right. (#5-6)
• Remove the air cleaner box 1.
• Disconnect the ISC valve coupler 2 and IAP/TP/IAT sensor
coupler 3.
• Disconnect the throttle cables 4 from their drum.
• Remove the throttle body 5.
%
Do not snap the throttle valve from full open to full
close after disconnecting the throttle cables. It may
cause damage to the throttle valve and throttle body.