Selecting Nav Page Eta Or Alt Display Option - Honeywell GNS-XLS Operator's Manual

System Operation
4. ENTER Key - DEPRESS to select option. (Figure 3-185)
NOTE: To display numbers
when the DIS option is
selected, a Flight Plan must
be selected and a leg
defined. To display numbers
when the ETE or ETA option
is selected, a valid ground
speed is required. Altitude
constraints and waypoint off-
sets are only displayed if
programmed.
SELECTING NAV PAGE
ETA OR ALT DISPLAY
OPTION (NAV Page 1, 2,
or 3)
The pilot can view the esti-
mated time of arrival or alti-
tude constraint of TO way-
point on the NAV Pages.
Selecting ALT Display:
1. NAV Key - DEPRESS to
display the NAVIGA-
TION Page.
2. Line Select
DEPRESS to position
the cursor over the ETA
field. (Figure 3-186)
3. BACK Key - DEPRESS.
ALT? appears in cursor.
4. ENTER Key - DEPRESS
to display
Constraint. (Figure 3-
187)
NOTE: Altitude constraint and waypoint offset are only displayed if a
VNAV Waypoint is programmed at the TO Waypoint and VNAV is
valid. The altitude cannot be changed on these pages. The ALT dis-
play should always be selected during SID, STAR, or Approach pro-
cedures.
3-116
<
<
<
<
<
<
Key -
<
<
Altitude
GNS-X Flight Management System
LS
ACTIVE FPL
FR RW19R
TO ORD 00:42
AZO 00:16
KDTW 01:11
######
DEPART
ARRIVE
APPROACH
Figure 3-185
NAVIGATION 1/4
DIRECT
TO BDF
DIS
ETE
DTK
GS
WIND
-AUTO-
Figure 3-186
NAVIGATION 1/4
DIRECT
TO BDF
DIS
ETE
DTK
GS
WIND
-AUTO-
Figure 3-187
1/1
1
2
3
4
>
ETE
>
ERASE
23:03
05:22
>
1328.5
18:59
049
>
228
230/ 8
>
23:03
12000G
>
1328.5
05:46.3
049
>
228
230/ 8
>
Rev. 3
Sep/96