To Update The Trip Plan Leg To The Current To Waypoint With An Active Flight Plan Selected; Flight Plan Fuel Planning - Honeywell GNS-XLS Operator's Manual

System Operation
To update the TRIP PLAN leg to the current TO waypoint with
an Active Flight Plan selected:
a. Line Select Key - DEPRESS to position cursor over TRIP
PLAN field.
b. ENTER the letter [A] in the cursor.
c. ENTER Key - DEPRESS twice to display information in the
data fields.
NOTE: If an offset waypoint is in the TO field the OFFSET WPT
Page will appear. The ENTER Key must be depressed again.
The TRIP PLAN leg will display DIRECT TO the current NAVIGA-
TION Page TO waypoint.
Selecting another display page (other than MSG and FUEL PLAN)
and returning to the TRIP PLAN Page will also update the leg with
DIRECT TO the current NAVIGATION Page TO waypoint.

FLIGHT PLAN FUEL PLANNING

The FUEL PLAN Page provides the capability to calculate fuel con-
sumption information for Active or Stored Flight Plans, DIRECT TO
Legs or Random Legs without affecting any of the system's naviga-
tion functions.
The Fuel Plan Number and Origin and Destination identifiers,
TO/FROM leg and groundspeed value on this page will be identical
to the TRIP PLAN Page. Changing GS or the current leg on the
FUEL PLAN Page also affects the TRIP PLAN Page. Pilot initiated
changes made to the FLOW field on the FUEL STATUS Page are
reflected on the FUEL PLAN Page.
1. PLAN Key - DEPRESS
to display FUEL PLAN
Page.
NOTE: Initially the FUEL
PLAN will display the Active
Flight Plan (if selected). The
initial leg displayed will be
DIRECT TO the current TO
waypoint from NAV page 1.
(Figure 3-164)
2. Line Select
3-100
<
Key -
GNS-X Flight Management System
LS
PLAN 3/8
FUEL PLAN
DIRECT
TO LIT
GS
FLOW
LEG FUEL
FPL FUEL
REM @ KHPN
Figure 3-164
>
A
KDAL
KHPN
434
>
1200
271
2938
1264
Rev. 3
Sep/96