Selecting Update As Active Flight Plan - Honeywell GNS-XLS Operator's Manual

13. CRUISE MODE - VERIFY or
INSERT an amended cruise
mode.
14. ENTER Key - DEPRESS.
The cursor positions over
TRANSMIT REQUEST?
field. (Figure 7-127)
15. ENTER Key - DEPRESS to
initiate a Flight Plan Update.
ACTIVE FPL Page will
appear.
NOTE: For aircraft equipped with the Antenna Switching Unit, if DATA
LINK DISABLED message appears DEPRESS momentary AFIS
annunciator to enable the air to ground data link. Also enable VHF or
satellite network.
Wait for DATA CENTER AK message if sending multiple requests.

SELECTING UPDATE AS ACTIVE FLIGHT PLAN

1. FPL Key - DEPRESS until
AFIS FLIGHT PLAN LIST
Page appears with Updated
Flight Plan (UPDA - XXXX).
(Figure 7-128)
2. Line Select Key - DEPRESS
to position cursor over
Updated Flight Plan.
3. ENTER Key - DEPRESS.
Cursor positions itself over
REPLACE ACTIVE FPL?
4. ENTER Key - DEPRESS to
replace Active Flight Plan
with Updated Flight Plan.
(Figure 7-129)
5. ACTIVE FPL - CONFIRM.
Updated
becomes the Active Flight
Plan.
Rev. 3
GNS-X
Sep/96
Flight Plan
Flight Management System AFIS Operation
LS
AFIS FPL UPDATE
ACTUAL FL
ASSIGNED FL
PAYLOAD
FUEL REM
CRUISE MODE
TRANSMIT REQUEST?
Figure 7-127
AFIS
FLIGHT PLAN LIST 1/4
<
CYUL-KJFK
UPDA-KORD
<
REPLACE ACTIVE FPL?
Figure 7-128
AFIS
FLIGHT PLAN LIST 1/4
<
CYUL-KJFK
UPDA-KORD
<
REPLACE ACTIVE FPL?
Figure 7-129
410
370
1200
11985
M80
06APR9O
16APR90
06APR9O
16APR90
7-61