Send Afis Message Page - Honeywell GNS-XLS Operator's Manual

TRANSMIT REQUEST?: When cursor is on this field and ENTER is
pressed, the recall request is sent to the Global Data Center via data
link. (Figure 7-22)
DATA LINK DISABLED: Aircraft equipped with the Antenna
Switching Unit, must DEPRESS momentary AFIS annunciator to
enable the air to ground data link. VHF or satellite network must also
be enabled.

SEND AFIS MESSAGE PAGE

This page is accessed by selecting Option 6 on the AFIS MENU
Page.
↑ ↓ indicate that pressing the Line Select Key adjacent the arrow will
move the cursor in the direction of the arrow.
PPM: Preprogrammed messages that can be stored in non-volatile
memory, selected and sent without being re-entered.
TO: Receiver of message.
FROM: Sender's identification (name or tail number).
#: Receiver's address. See Table A-1 for possible address varia-
tions and the method in which the Global Data Center processes the
message.
MESSAGE TEXT: Fifteen lines of text entry available. Text must be
flight related when using the VHF network operating mode.
SEND MESSAGE: When cur-
sor is over this field and ENTER
is pressed the message is sent
via the data link. (Figure 7-24)
DATA LINK
Aircraft equipped with the
Antenna Switching Unit, must
DEPRESS momentary AFIS
annunciator to enable the air to
ground data link. VHF or satel-
lite network must also be
enabled.
Rev. 5
GNS-X
Sep/97
DISABLED:
Flight Management System AFIS Operation
LS
SEND AFIS MSG
$
TO: GLOBAL
% FR: N214SC
#:FAX 752 0604
DELAYED DUE TO WX
NEW ETA IS 1400Z
<
SEND MESSAGE?
Figure 7-24
>
PPM
>
7-15