Direct To - Hp Waypoint; To Select And Go Direct To Hp Waypoint; To Cancel Holding Pattern:(From The Holding Pattern Page) - Honeywell GNS-XLS Operator's Manual

System Operation

DIRECT TO - HP WAYPOINT

d
1. Key - DEPRESS.
cursor over the current TO waypoint.
2. Line Select Key - DEPRESS to position the cursor over the
desired HP identifier. (Figure 3-89)
NOTE: Active Flight Plans
exceeding 18 waypoints will
be continued on subsequent
d
pages. Press
PRV Key to access remain-
ing waypoints.
3. ENTER Key - DEPRESS
to display the HOLDING
PATTERN Page with
both the OK? ENTER
and CANCEL option.
(Figure 3-90)
NOTE: The holding pattern
may be edited if required , at
this time. See Page 3-67 for
details.
To Select and Go Direct
To HP Waypoint:
4. ENTER Key - DEPRESS.
Display automatically
advances to NAVIGA-
TION Page 1.
5. DIS, DTK - CHECK.

To Cancel Holding Pattern:(from the Holding Pattern page)

1. Line Select - DEPRESS to position cursor over desired HP way-
point.
2. Hold Key - DEPRESS
3. Line Select Key - DEPRESS to position the cursor over CANCEL?.
4. ENTER Key - DEPRESS. Display automatically advances to
NAVIGATION Page 1 and aircraft proceeds Direct To the way-
point with the Holding Pattern canceled.
3-52
A DIRECT TO Page appears with the
<
, NXT or <
<
<
<
AT BDF
INBOUND CRS
MAX HOLDING TAS
TURN DIR
LEG TIME
LEG DIS
EXIT MODE
OK?
GNS-X Flight Management System
LS
DIRECT 1/2
KSNA
MUSEL
HEMET
TRM HP
EED*
TBC
FMN
PUB
HLC
Figure 3-89
HOLDING PATTERN
DIRECT ENTRY
ENTER
Figure 3-90
>
PWE
LMN
>
BURKK
BDF
>
GSH
KDTW
>
*****
1/1
>
>
070
261
>
RIGHT
1.5
>
(0.0)
MANUAL
>
CANCEL
Rev. 3
Sep/96