Honeywell GNS-XLS Operator's Manual page 217

b. The FUEL PLAN Page is selected.
c. Leg or GS change is made on the FUEL PLAN Page. LEG
FUEL and FPL FUEL are recalculated whenever the FLOW
changes.
d. FUEL FLOW is changed on FUEL STATUS Page.
NOTE: The REM @ field only appears when a DIRECT TO leg is
displayed. (Figure 3-169) The REM @ Field will be displayed in yel-
low anytime the REM @ value falls below the reserve fuel pro-
grammed on Plan Page 1.
12. To review the remainder of the Flight Plan: position cursor over
TO field, DEPRESS ENTER Key TWICE to call up next leg.
(Groundspeed and/or Fuel Flow should be updated if necessary).
NOTE: Information between
any desired waypoints can
be reviewed by selecting the
FUEL PLAN Page and
entering a FROM - TO leg
from the Flight Plan. (Figure
3-168) or by executing the
present position direct proce-
dures (Figure 3-169). If the
TO waypoint is not on the
selected Flight Plan, the
Flight Plan number and ori-
gin/destination fields will dis-
play dashes.
To update the Fuel Plan leg
to the current TO leg of the
Active Flight Plan:
a. Line Select Key -
DEPRESS to posi-
tion cursor over
FUEL PLAN field.
b. ENTER the letter [A]
in the cursor.
c. ENTER
DEPRESS TWICE to display information in data fields.
Rev. 3
Sep/96
FR
<
TO
GS
FLOW
LEG FUEL
FPL FUEL
DIRECT
<
TO
GS
FLOW
LEG FUEL
FPL FUEL
REM @ COS
Key -
GNS-X Flight Management System
LS
System Operation
PLAN 3/8
FUEL PLAN
KLAX KLAX
DAG KMDW
(MAN)
Figure 3-168
PLAN 2/8
FUEL PLAN
----
COS ----
Figure 3-169
>
425
>
1200
324
324
>
--
457
>
1300
1679
1679
5761
3-103