Ground Network Operating Modes; Auto To Man Or Off Mode - Honeywell GNS-XLS Operator's Manual

GROUND NETWORK OPERATING MODES

The status of each network is
held in non-volatile memory.
When the system is initialized,
all networks will prefill with the
status at system shut-down.
The following procedures allow
the ground networks to be man-
ually operated, turned OFF, or
returned to AUTO.
NOTE: SITA/AVICOM are two
different ground networks cover-
ing different regions.
appropriate network is selected
for operation based on current
Lat/Lon location of aircraft.

AUTO TO MAN OR OFF MODE

1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line Select
DEPRESS to position cur-
sor over Option 8, OPER-
ATING MODES. (Figure 7-
119)
3. ENTER Key - DEPRESS.
4. Line Select
DEPRESS to position cur-
sor over AUTO option of
desired ground network
field. (Figure 7-120)
5. BACK Key - DEPRESS
until MAN or OFF appears
in the cursor.
6. ENTER Key - DEPRESS to
select MAN or OFF mode.
(Figure 7-121)
NOTE: If MAN is selected, all other networks will indicate OFF.
7-58
GNS-X
1
<
2
3
<
4
5
<
6
7
<
8
The
Key -
Key -
Flight Management System AFIS Operation
LS
AFIS MENU
AFIS FLT PLAN
SIGMETS
TERMINAL WX
WINDS ALOFT
RECALL AFIS FPL
SEND AFIS MSG
DISPL AFIS MSG
OPERATING MODES
Figure 7-119
AFIS OPERATING MODES
AUTO REPORT
AUTO WX UPDT
ARINC
SITA/AVICOM
AIR CANADA
ACTIVE LINK: ARINC
Figure 7-120
AFIS OPERATING MODES
AUTO REPORT
AUTO WX UPDT
ARINC
SITA/AVICOM
AIR CANADA
ACTIVE LINK: ARINC
Figure 7-121
>
ON
ON
>
AUTO
AUTO
>
AUTO
>
ON
ON
>
MAN
OFF
>
OFF
Rev. 5
Sep/97