Non-Peaks Display - Honeywell EGPWS MK V Pilot's Manual

Mark V and Mark VII EGPWS Pilot's Guide
Non-Peaks
Display
Continued
Each specific color and intensity represents terrain (and
obstacles) below, at, or above the aircraft's altitude based on
the aircraft's position with respect to the terrain in the
database. If no terrain data is available in the terrain database,
then this area is displayed in a low-density magenta color.
Terrain more than 2000 feet below the aircraft, or within 400
(vertical) feet of the nearest runway elevation, is not displayed
(black). With version -218-218 or later, the transition to black
may occur below 400 feet based on runway and terrain
database integrity for a given area.
When a caution alert is triggered, the terrain (or obstacle) that
created the alert is changed to solid yellow (100% density) as
illustrated below.
060-4241-000
Rev H, August 2011
TERRAIN IS SHOWN
IN SHADES OF GREEN,
YELLOW AND RED
System Description
31