Editing A Sid From Any Stored Fpl Or The Active Fpl Page - Honeywell GNS-XLS Operator's Manual

EDITING A SID FROM ANY STORED FPL OR THE ACTIVE FPL
PAGE
1. Line Select
DEPRESS to position
cursor over the DEPART
field on the FLIGHT
PLAN Page.
2. ENTER Key - DEPRESS.
3. Line Select Key adjacent
to SID field - DEPRESS
to position cursor over
the first SID identifier on
the list.
NOTE: A list
appear if the TRANSITION/
RUNWAY are compatible
with other SIDs. (Figure 3-
28)
4. Line Select Key adjacent
to the TRANSITION field
- DEPRESS to position
cursor over the current
TRANSITION waypoint
on the list. (Figure 3-29)
5. Line Select
DEPRESS to position the
cursor over the desired
TRANSITION. (Figure 3-
30)
Rev. 3
Sep/96
Key -
will only
Key -
GNS-X Flight Management System
LS
System Operation
DEPARTURE KSEA
RUNWAY
SID
TRANSITION
ELMAA5?
Figure 3-28
DEPARTURE KSEA
RUNWAY
SID
TRANSITION
TOU
BLUIT
CVO
HQM ?
UBG
BKE
Figure 3-29
DEPARTURE KSEA
RUNWAY
SID
TRANSITION
TOU LKV ?
BLUIT
CVO
HQM
UBG
BKE
Figure 3-30
1/1
>
RW16L
------
>
HQM
1/1
>
RW16L
------
>
------
1/1
>
RW16L
------
>
------
3-21