To Insert A New Identifier; To Delete Text When There Is No Data Entry In Progress; Winds Aloft Menu - Data Update And Review - Honeywell GNS-XLS Operator's Manual

8. ENTER Key - DEPRESS. Identifiers listed on this page will be
transmitted to the ground via the data link.
NOTE: Wait for DATA CENTER AK message if sending multiple
requests.
9. If there are identifiers:
Placing the cursor over the
selected identifier on the ter-
minal weather and pressing
ENTER will display the
weather information for the
airport. (Figure 7-57)
10. Weather information - REVIEW.

TO INSERT A NEW IDENTIFIER:

11. Line Select - DEPRESS to position the cursor over the identifier field.
12. IDENTIFIER - INSERT. The data text fields will go blank.
13. ENTER Key - DEPRESS. The TERMINAL WX Menu Page
appears with the new identifier in place of the original identifier,
and the cursor positioned at the location of the original identifier
selected. If there is no data available for this new identifier, it will
appear in parentheses.
TO DELETE TEXT WHEN THERE IS NO DATA ENTRY IN
PROGRESS:
14. Place cursor over airport identifier on TERMINAL WX page.
15. Depress BACK key. DELETE? will appear.
16. ENTER Key- Depress to delete the airport identifier.
WINDS ALOFT MENU - DATA
UPDATE AND REVIEW
1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line Select
DEPRESS to position cur-
sor over Option 4, WINDS
ALOFT. (Figure 7-59)
7-34
GNS-X
KSTL
SA: 1547 50 SCT E90
BKN 120 BKN 10 156
82 /70 /1912G18 /001
CB NW-NE
MOVG NE
1
<
2
3
<
4
Key - 5
<
6
7
<
8
Flight Management System AFIS Operation
LS
TERMINAL WEATHER 1/5
09APR90
Figure 7-57
AFIS MENU
AFIS FLT PLAN
SIGMETS
TERMINAL WX
WINDS ALOFT
RECALL AFIS FPL
SEND AFIS MSG
DISPL AFIS MSG
OPERATING MODES
Figure 7-59
Rev. 3
Sep/96