Selecting Operating Modes (For Afis Users Not Equipped With Satellite Data Communications System); Auto Reporting; Turning Auto Report Off - Honeywell GNS-XLS Operator's Manual

SELECTING OPERATING MODES (FOR AFIS USERS NOT
EQUIPPED WITH SATELLITE DATA COMMUNICATIONS
SYSTEM)

AUTO REPORTING

When the system is initialized,
the Automatic Reporting and or
Auto Wx update function will
retain the status at aircraft shut-
down. The following proce-
dures allow the function to be
turned OFF and back ON.
TURNING AUTO REPORT
OFF
1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line Select
DEPRESS to position cur-
sor over Option 8, OPER-
ATING MODES. (Figure 7-
107)
3. ENTER Key - DEPRESS.
4. Line Select
DEPRESS to position cur-
sor over ON option of
AUTO REPORT
(Figure 7-108)
5. BACK Key - DEPRESS.
OFF appears in the cursor.
(Figure 7-109)
6. ENTER Key - DEPRESS to
turn OFF
REPORT function.
NOTE: If all ground networks
are OFF, then AUTO REPORT
will be OFF.
7-54
GNS-X
Key -
Key -
field.
the AUTO
Flight Management System AFIS Operation
LS
AFIS MENU
1 AFIS FLT PLAN
<
2 SIGMETS
3 TERMINAL WX
<
4 WINDS ALOFT
5 RECALL AFIS FPL
<
6 SEND AFIS MSG
7 DISPL AFIS MSG
<
8 OPERATING MODES
Figure 7-107
AFIS OPERATING MODES
AUTO REPORT
AUTO WX UPDT
ARINC
SITA/AVICOM
AIR CANADA
ACTIVE LINK:
Figure 7-108
AFIS OPERATING MODES
AUTO REPORT
AUTO WX UPDT
ARINC
SITA/AVICOM
AIR CANADA
ACTIVE LINK:
Figure 7-109
>
ON
ON
>
AUTO
OFF
>
AUTO
ARINC
>
OFF
ON
>
AUTO
OFF
>
AUTO
ARINC
Rev. 5
Sep/97