Returning To Auto Report/Auto Wx Update - Honeywell GNS-XLS Operator's Manual

RETURNING TO AUTO REPORT/AUTO WX UPDATE

1. AFIS Key - DEPRESS to display AFIS MENU Page.
2. Line Select Key - DEPRESS to
position cursor over Option 8,
OPERATING
(Figure 7-82)
3. ENTER Key - DEPRESS.
4. Line Select
DEPRESS to position cur-
sor over OFF option of
AUTO REPORT or AUTO
WX UPDATE field. (Figure
7-83)
5. BACK Key - DEPRESS.
ON appears in the cursor.
(Figure 7-84)
6. ENTER Key - DEPRESS to
turn ON
REPORT or AUTO WX
UPDATE function.
NOTE: If all networks are OFF,
then AUTO REPORT and
AUTO WX UPDATE will be
OFF.
Rev. 3
GNS-X
Sep/96
MODES.
Key -
the AUTO
Flight Management System AFIS Operation
LS
AFIS MENU
1 AFIS FLT PLAN
<
2 SIGMETS
3 TERMINAL WX
<
4 WINDS ALOFT
5 RECALL AFIS FPL
<
6 SEND AFIS MSG
7 DISPL AFIS MSG
<
8 OPERATING MODES
Figure 7-82
AFIS OPERATING MODES
AUTO REPORT
AUTO WX UPDT
VHF NETWORK
SAT NETWORK
ACTIVE LINK:
Figure 7-83
AFIS OPERATING MODES
AUTO REPORT
AUTO WX UPDT
VHF NETWORK
SAT NETWORK
ACTIVE LINK:
Figure 7-84
>
OFF
ON
>
ON
ON
>
ARINC
>
ON
ON
>
ON
ON
>
ARINC
7-45