Gns-Xls Flight Management System - Honeywell GNS-XLS Operator's Manual

3. ENTER Key - DEPRESS.
4. Recorded Radial - INSERT.
5. ENTER Key - DEPRESS.
6. Recorded Distance - INSERT (NM and tenths).
7. ENTER Key - DEPRESS.
8. Waypoint Coordinates -
VERIFY for reasonabili-
ty. (Figure 3-181)
9. ENTER Key - DEPRESS.
The DIF display shows
the direction and dis-
tance in degrees, min-
utes, and hundredths of
minutes from the FIX
position to the composite
position. (Figure 3-182)
10. ENTER
DEPRESS, if position
update desired.
If System Updated :
The VLF (RPU) sensor and
the VPU interfaced to the
updated CDU are updated
as well as the composite
position. GPS, and IRS sen-
sors are not updated. Only
IRS velocities are required to
contribute to the composite position.
If Update Not Desired:
11. NAV, PLAN, FPL, TUNE, VNAV, HDG, or
to cancel the position fix.
Rev. 3
Sep/96
<
Key -
<
GNS-X Flight Management System
LS
System Operation
OFFSET WPT 1/1
WAYPOINT
RAD
DIS
POS N 40
W097
OK? ENTER
Figure 3-181
POSITION FIX
POS N 40
W097
IDENT
FIX N 40
W097
DIF N
W
Figure 3-182
d
Key - DEPRESS
LNK*
230.0
>
15.0
47.30
01.20
49.30
03.20
>
LNK*
47.70
>
01.50
1.60
1.70
3-113