Trip Planning - Honeywell GNS-XLS Operator's Manual

System Operation
NOTE: HOURS of fuel and RANGE are calculated to the RESERVE
fuel, not "0" fuel, unless the RESERVE fuel is "0".
To change the unit of measurement (LB or KG):
a. Line Select Key - DEPRESS to position the cursor over the
REMAINING field. DEPRESS the Line Select Key above to
position the cursor over the unit field (LB or KG).
b. BACK
DEPRESS.
field will display LB?
or KG? to notify the
pilot of the pending
change. (Figure 3-
155)
c. ENTER
DEPRESS. The units
field on the title line
and specific range line
will change. All fuel
figures are recalculat-
ed to reflect the new units of measurement.

TRIP PLANNING

The TRIP PLAN Page provides the capability to calculate information
for Active or Stored Flight Plans, DIRECT TO legs, or Random legs
without affecting any of the system's navigation functions.
1. PLAN Key - DEPRESS to display TRIP PLAN Page.
NOTE: Initially the TRIP
PLAN Page will display the
Active Flight Plan (if pre-
sent). The initial leg dis-
played will be DIRECT TO
the current TO waypoint on
the active flight plan or the
first TO waypoint on the
flight plan selected. (Figure
3-156)
3-96
Key -
The
Key -
<
GNS-X Flight Management System
LS
PLAN 1/8
FUEL STATUS
REMAINING
RESERVE
FLOW
LAST INPUT:
HOURS
RANGE
NM/LB
Figure 3-155
PLAN 2/8
TRIP PLAN
DIRECT
TO LIT
GS
DIS/DTK 258.1/060
ETE
FPL 1242/03+03
ETA @KHPN
RAIM @KHPN
Figure 3-156
>
LB?
5000
>
1000
1200
>
00:05
03+19
1341
0.335
A
KDAL
KHPN
407
<
00:38.2
04:00
AVAIL
Rev. 3
Sep/96