Adding Or Deleting Waypoints Within A Sid; To Add A Waypoint; To Delete A Waypoint - Honeywell GNS-XLS Operator's Manual

ADDING OR DELETING WAYPOINTS WITHIN A SID

NOTE: When a SID is modified by adding or deleting waypoints, the
sequence of waypoints is no longer identified as a SID.

To Add a Waypoint

1. Line Select
DEPRESS to position
cursor over the SID way-
point identifier that will
follow the new entry on
the Flight Plan page.
See Figure 3-33.
2. Waypoint Ident - INSERT.
3. ENTER Key - DEPRESS
twice.
NOTE: The previously in-
dented SID waypoints move
over one space to the left on
the screen and are treated as
normal waypoints in the
Flight Plan. (Figure 3-34)

To Delete a Waypoint

4. Line Select
DEPRESS to position
the cursor over the way-
point to be deleted on
the Flight Plan page.
5. BACK Key - DEPRESS. A DELETE? prompt will appear adja-
cent to the waypoint to be deleted.
6. ENTER Key - DEPRESS. The waypoint will be deleted and the
waypoints of the SID will be treated as non-procedure waypoints
in the flight plan.
Rev. 3
Sep/96
Key -
<
<
<
<
DEPART
ARRIVE
<
APPROACH
<
<
<
<
DEPART
ARRIVE
Key -
<
APPROACH
GNS-X Flight Management System
LS
System Operation
ACTIVE FPL 1/1
RW16L
ELMAA
LKV
KLAX
Figure 3-33
ACTIVE FPL
RW16L - KLAX
ELMAA
HQM
LKV
KLAX
Figure 3-34
ETE
>
ERASE
1/1
ETE
>
ERASE
3-23