Airport Analysis Page - Honeywell GNS-XLS Operator's Manual

TRANSMIT: When the cursor is over this field and ENTER is
pressed, each of the items marked with a Y, along with any free text,
will be transmitted via the data link. The DATA LINK DISABLED
message will appear on this line if the data link is disabled and the
request will not be transmitted.

AIRPORT ANALYSIS PAGE

This page allows the operator
to transmit a request for takeoff
and landing weight restrictions
for a specific airport runway.
See Figure 8-52.
AIRPORT IDENT: A four char-
acter field for entering the iden-
tifier associated with the airport.
At least two characters must be
entered.
RUNWAY ID: A ten character field for entering the runway identifier.
At least one character must be entered.
TEMP C: A three character field. The leading character is the char-
acter is the + or - sign followed by two numeric characters for airport
temperature. If no sign is entered a positive value is assumed. If a
third digit is needed for a positive temperature, a + will not be dis-
played.
Two lines of free text can be entered with a maximum of 20
alpha/numeric characters for each line.
TRANSMIT: Pressing ENTER with the cursor over TRANSMIT will
send the displayed data to the home base via the data link. DATA
LINK DISABLED will appear on this line if the data link is disabled
and the request will not be transmitted.
Rev 8
GNS-X
Apr/00
<
AIRPORT IDENT KLAX
<
RUNWAY ID RW25R
<
TEMP C -25
<
<
FMS with Regional Airline AFIS
LS
AIRPORT ANALYSIS
TRANSMIT
Figure 8-52
>
>
8-43