Option 2 - Honeywell GNS-XLS Operator's Manual

c. Line Select Key -
DEPRESS to position
cursor over the desired
destination waypoint.
(Figure 3-38). If applic-
able, use PRV and
NXT Keys to access all
airway
pages.
NOTE: As the cursor is
moved up or down, "TO" will
appear next to the cursor
and a question mark will follow the ident. The waypoints between the
TO/FROM waypoints will be displayed in yellow.
d. After selecting the ending waypoint (TO) on the Airway,
depress the ENTER Key to merge the Airway waypoints into
the flight plan and return to the FPL Page.
NOTE: If inserting the airway
segment into the Flight Plan
results in more than 50 way-
points in the stored Flight
Plan or 100 waypoints on the
Active Flight Plan, the mes-
sage "FPL FULL" will appear.
NOTE: Look carefully at the
flight plan to see if any way-
points are out of sequence.
Delete waypoints as neces-
sary.

Option 2

a. # Key - DEPRESS
then enter the airway
identifier.
b. ± Key - DEPRESS
and type destination
waypoint. (Figure 3-
39)
c. ENTER Key - DE-
PRESS. (Figure 3-40)
Rev. 3
Sep/96
<
<
<
<
waypoints
<
<
<
<
<
<
<
<
<
<
GNS-X Flight Management System
LS
System Operation
AIRWAY J501
TO RZS ?
ZONAL
BSR
PESCA
PYE
NIECE
COPPO
OED
SELECT ENDING WPT
Figure 3-38
ACTIVE FPL
KSEA - KLAX
ELMAA
HQM
#J501+RZS
******
DEPART
ARRIVE
APPROACH
Figure 3-39
AIRWAY J501
FR HQM
OED
COPPO
NIECE
PYE
PESCA
BSR
ZONAL
SELECT ENDING WPT
Figure 3-40
1/2
>
FR HQM
HQM31
>
TOU
FINGS
>
ZESNB
CAFTA
>
YZP
MOCA1
>
1/1
ETA
>
ERASE
3/3
>
TO RZS ?
3-25