Erasing A Sid From Any Stored Fpl Or The Active Fpl Page - Honeywell GNS-XLS Operator's Manual

System Operation
6. ENTER Key - DEPRESS
to select desired TRAN-
SITION. The system will
automatically load the
compatible SID associat-
ed with the selected
TRANSITION. (Figure 3-
31)
7. ENTER Key - DEPRESS
to select a new SID and
insert the new SID into
the flight plan.
NOTE: The RUNWAY can also be edited without changing the origi-
nal SID if the SID/TRANSITION are compatible. This is done by
pressing the Line Select Key adjacent to the RUNWAY field. Press
the Line Select Key to position the cursor over the desired RUNWAY.
Press ENTER to load the desired RUNWAY on the SID.
8. ENTER Key - DEPRESS to select the edited SID as displayed
and insert it into the flight plan.
NOTE: Look carefully at the flight plan to see if any waypoints are
out of sequence. Delete waypoints as necessary.
ERASING A SID FROM ANY STORED FPL OR THE ACTIVE FPL
PAGE
1. Line Select
DEPRESS to position
cursor over DEPART
field on the Flight Plan
Page.
2. ENTER Key - DEPRESS.
3. Line Select
DEPRESS to position
cursor over ERASE?
(Figure 3-32).
4. ENTER Key - DEPRESS
to erase SID and return to Flight Plan page.
3-22
SELECT?
Key -
<
Key -
<
GNS-X Flight Management System
LS
DEPARTURE KSEA
RUNWAY
SID
TRANSITION
WAYPOINTS OF SID:
SUMMA
LKV
Figure 3-31
DEPARTURE KSEA
RUNWAY
SID
TRANSITION
WAYPOINTS OF SID:
ELMAA
HQM
Figure 3-32
1/1
>
RW16L
SUMMA5
>
LKV
>
ERASE
1/1
>
RW16L
ELMAA3
>
HQM
>
ERASE?
Rev. 3
Sep/96