Performing Fde Prediction For Oceanic/Remote Operation - Honeywell GNS-XLS Operator's Manual

Flight management system
Table of Contents

Advertisement

System Operation
7.
POS Coordinates- VER-
IFY for reasonability.
(Figure 3-205)
8.
ENTER Key-DEPRESS.
NOTE: An Offset Waypoint
is used in the same manner
as any other waypoint.
PERFORMING FDE PREDICTION FOR
OCEANIC/REMOTE OPERATION
All references to FDE prediction do not apply to 17960-0101
units. FDE prediction is only available in 17960-0102 units.
This procedure must be performed prior to departure for a flight plan
involving Oceanic/Remote operation where GPS is to be the sole
source of navigation. The
maximum segment length for
which FDE prediction can be
calculated is 25 hours at a
ground speed of 100 Kts.
1. PLAN Key - DEPRESS
to display PLAN 7/8
FDE Page. See Figure
3-206
2. Line
Select
DEPRESS if necessary
to place the cursor over
the DEPART DT field.
Enter the departure date
for which FDE prediction
is desired.
NOTE: The date entered
may be up to six months
either side of the current
date.
3. ENTER
DEPRESS.
3-130
Key
-
Key
-
GNS-X
Flight Management System
LS
OFFSET WPT
WAYPOINT
CHAD*
RAD
DIS
POS
N 38 37.20
W105 37.00
818 WPTS AVAIL
Figure 3-205
PLAN
7/8
FDE
DEPART DT
20 DEC 95
DEPART GMT
ROUTE SPACING
EXPECTED GS
START FDE WPT
END FDE WPT
EXCLUDE SATS
PREDICTION UNAVAIL
Figure 3-206
PLAN
7/8
FDE
DEPART DT
25 DEC 95
DEPART GMT
ROUTE SPACING
EXPECTED GS
START FDE WPT
END FDE WPT
EXCLUDE SATS
START CALC? ENTER
Figure 3-207
1/1
030.0
>
12.3
<
--:--
--
<
---
-----
<
-----
(QTY 0)
<
<
13:00
35
<
300
JFK
<
EBBR
(QTY 0)
<
Rev. 3
Sep/96

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents