Entering An Approach On A Stored Fpl Or The Active Fpl Page - Honeywell GNS-XLS Operator's Manual

System Operation
ENTERING AN APPROACH ON A STORED FPL OR THE
ACTIVE FPL PAGE
1. Line Select
DEPRESS to position cur-
sor over APPROACH?
field on the ACTIVE FPL
page. (Figure 3-52)
2. ENTER Key - DEPRESS
to display APPROACH
Page. (Figure 3-53)
3. APPROACH
identifier - VERIFY or
INSERT valid ident.
NOTE: If there are no
APPROACHes associated
with the Approach Airport,
the message
APPROACH
appears and the airport ident
field flashes. Depress FPL
Key to return to Active Flight
Plan.
4. Line Select
DEPRESS to position
cursor over the desired
RUNWAY on the run-
way list. (Figure 3-54)
NOTE: If a circling Type
Approach is desired, use line
select to display type. Go to
step 6.
5. ENTER Key - DEPRESS
to select RUNWAY. If a
valid runway has been
selected, the cursor
moves to
approach TYPE.
6. Line Select Key- DEPRESS to position cursor over the desired
Approach TYPE if required.
3-32
Key -
<
<
<
<
<
Airport
"NO
AVAIL"
Key -
<
the first
GNS-X Flight Management System
LS
ACTIVE FPL
KORD - KEWK
PNT
CAP
KEWK
DEPART
ARRIVE
APPROACH?
Figure 3-52
APCH KEWK
RUNWAY
TYPE
TRANSITION
RW17 ?
RW35
RW06
RW24
Figure 3-53
APCH KEWK
RUNWAY
TYPE
TRANSITION
RW17
RW35 ?
RW06
RW24
Figure 3-54
1/1
ETA
>
ERASE
1/1
>
------
------
>
------
1/1
>
------
------
>
------
Rev. 3
Sep/96