When Update Is Complete; If Update Fails - Honeywell GNS-XLS Operator's Manual

Database Update
WHEN UPDATE IS COM-
PLETE
If the update is successful,
Figure 5-3 is displayed.
8. Turn system OFF or
DEPRESS ENTER Key
to restart navigation.

IF UPDATE FAILS

If the database update fails,
Figure 5-4 is displayed.
Depress the 1 Key then
ENTER Key to retry the
update or use the following
procedure. Sometimes when
a retry is initiated, a display
such as that shown in Figure
5-5 may be seen momentari-
ly.
1. Update Card - REMOVE.
2. Turn system OFF.
3. Update Card - RE-
INSERT into CDU.
4. Turn system ON and
retry Update
UPDATE
DURE, Steps 1-7.
5-2
ENTER CHOICE:
1
<
2
<
using
PROCE-
ENTER CHOICE:
1
<
2
<
GNS-X Flight Management System
LS
UPDATE COMPLETE
PRESS ENTER
TO
RESTART NAV
Figure 5-3
DATA BASE UPDATE
ERROR: FAILED
BEGIN UPDATE
RESTART NAV
(REMOVE CARD)
Figure 5-4
DATA BASE UPDATE
ERROR: CARD INVALID
RETRY UPDATE
RESTART NAV
(REMOVE CARD)
Figure 5-5
Rev. 3
Sep/96