Verifying Or Changing Date And Time - Honeywell GNS-XLS Operator's Manual

System Operation
The FUEL PLAN leg displays DIRECT TO the current NAVIGATION
Page TO waypoint.
Selecting another display page (other than MSG and TRIP PLAN)
and returning to FUEL PLAN Page also updates the leg with
DIRECT TO the current NAVIGATION Page TO waypoint.

VERIFYING OR CHANGING DATE AND TIME

DEPRESS the Plan Key until the DATE/GMT Page appears
DATE:
VERIFY or INSERT
Position cursor with Line Select Key and follow procedure in INITIAL-
IZATION PAGE section.
GMT:
VERIFY or INSERT
Position cursor with Line Select Key and follow procedure in INITIAL-
IZATION PAGE section.
NOTE: If GPS time is available, GMT is automatically updated to
GPS time. (Figure 3-170)
TAKEOFF:
The GMT at weight-off-
wheels plus 10 seconds.
(Figure 3-170)
LAND:
The GMT at weight-on-
wheels. This field is not dis-
played until 10 seconds after
weight-on-wheels occurs.
(Figure 3-170)
NOTE: TAKEOFF and LAND data may be based on groundspeed
and/or TAS valids depending upon system configuration.
FLIGHT TIME:
The elapsed flight time is displayed in hours and minutes. (Figure 3-170)
NOTE: TAKEOFF and Flight times will be altered if the GMT is
changed during flight.
3-104
GNS-X Flight Management System
LS
PLAN 5/8
DATE 18 FEB 95
GMT
TAKEOFF
LAND
FLIGHT TIME
Figure 3-170
>
14:13
20:43
22:45
02+02
Rev. 3
Sep/96