Flight Plan Section (Fpl Key); Flight Plan Pages; Flight Plan List - Honeywell GNS-XLS Operator's Manual

Flight management system
Hide thumbs

Advertisement

Table of Contents
Page Display Definitions
IDENT:
Displays the airport identifier for the airport closest to the system shut
down position. Dashes will be displayed when the cursor is placed
over the position (POS) field.
POS:
Displays the last system position at shut down. Dashes are dis-
played when the cursor is over the IDENT field.
PART NUMBER AND SOFTWARE MODIFICATION STATUS:
The bottom line of the display shows the unit part number and the
software level of the unit.
NOTE: This page cannot be recalled once DATE, GMT, and POS
have been entered. In order to display this again, the system must
be turned off and then turned back on.

FLIGHT PLAN SECTION (FPL KEY)

Upon pressing the FPL Key the FLIGHT PLAN LIST 1/1 Page will be
displayed and the following can be observed.
NOTE: The FLIGHT PLAN LIST page may automatically be dis-
played if the ENTER key is depressed at least three times while on
the initialization page.

FLIGHT PLAN PAGES

NOTE: If AFIS equipped the first page displayed after system initial-
ization will be the AFIS FPL LIST page in lieu of the FLIGHT PLAN
LIST page.
NOTE: If the data base contains company routes, the first page dis-
played after system initialization will be the COMPANY ROUTES
page in lieu of the FLIGHT PLAN LIST page. If both AFIS and
Company Routes are present, the COMPANY ROUTES page is dis-
played first.
FLIGHT PLAN LIST 1/1 (Page 1 of 1)
If the initialization airport matches a departure airport on the FLIGHT
PLAN LIST, the cursor will automatically be positioned over the first
matching Flight Plan.
Rev. 6
2-2
GNS-X
Flight Management System
LS
Jul/98

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Honeywell GNS-XLS