Turning Auto To Man; Returning To Auto - Honeywell GNS-XLS Operator's Manual

TURNING AUTO TO MAN

7. Line Select
DEPRESS
appears in the cursor.
8. ENTER Key - DEPRESS.
Cursor moves to REGION
field.
9. BACK Key - DEPRESS
until desired region appears
in cursor, either W. Atlantic,
E. Atlantic, Pacific, or
Indian. (Figure 7-105)
10. ENTER Key - DEPRESS to
select region.
moves to LINK field.
(Figure 7-106)
NOTE: All other regions are
now considered OFF.
11. ENTER Key - DEPRESS to
ACTIVATE the SAT net-
work link as operational and
return to AFIS OPERATING
MODES Page.
NOTE: When in MAN mode, the ACTIVE LINK will display NONE
until the aircraft is within the boundaries of the selected region.

RETURNING TO AUTO

12. Line Select Key - DEPRESS to position cursor over MAN field.
13. BACK Key - DEPRESS until AUTO appears in cursor.
14. ENTER Key - DEPRESS to select AUTO option. Cursor moves
to the LINK field.
15. ENTER Key - DEPRESS to ACTIVATE the SAT network link as
operational and return to AFIS OPERATING MODES Page.
Rev. 3
GNS-X
Sep/96
Key -
until MAN
Cursor
Flight Management System AFIS Operation
LS
AFIS OPERATING MODES
$ SAT LINK CONTROL
%
SAT COM: MAN
REGION: PACIFIC
LINK:OPERATIONAL
Figure 7-105
AFIS OPERATING MODES
$ SAT LINK CONTROL
%
SAT COM: MAN
REGION: PACIFIC
LINK:ACTIVATE?
Figure 7-106
7-53