Verifying Or Changing Aircraft Weight Parameters - Honeywell GNS-XLS Operator's Manual

VERIFYING OR CHANGING AIRCRAFT WEIGHT PARAMETERS

This procedure allows the pilot to confirm or adjust basic operating
weight, payload, or fuel to current on board data.
1. PLAN Key - DEPRESS to display AIRCRAFT WEIGHT Page
NOTE: BASIC OP WT, PAYLOAD, and FUEL ON BOARD fields will
be blinking if update has not been entered after system power up.
FUEL USED will remain dashes until auto fuel flow is detected.
2. Line Select
DEPRESS to place the
cursor over flashing weight
field. (Figure 3-171)
3. BASIC OP WT - VERI-
FY or INSERT.
4. ENTER Key - DEPRESS.
5. PAYLOAD - VERIFY or
INSERT.
6. ENTER Key - DEPRESS.
7. FUEL ON BOARD -
VERIFY or INSERT.
8. ENTER Key - DEPRESS.
NOTE: VERIFY INPUTS
field disappears and a
GROSS WT value replaces
dashes, and weight fields no
longer blink. (Figure 3-172)
VERIFY FUEL message
replaces VERIFY INPUTS
message when MAN fuel
flow is being used and FUEL ON BOARD has not been verified or
updated on PLAN Page 1 or 6.
All blinking weight fields must be verified or values inserted using the
ENTER Key, for GROSS WT field to display information.
Rev. 6
Jul/98
Key -
BASIC OP WT
PAYLOAD
FUEL ON BOARD
VERIFY INPUTS
FUEL USED
GROSS WT
BASIC OP WT
PAYLOAD
FUEL ON BOARD
FUEL USED
GROSS WT
GNS-X Flight Management System
LS
System Operation
PLAN 6/8
AIRCRAFT WEIGHT
-------
Figure 3-171
PLAN 6/8
AIRCRAFT WEIGHT
-------
Figure 3-172
7400
>
400
1600
>
>
----
7400
>
400
1600
>
>
9400
3-105