Cp-2B Control Panels; Electronic Flight Display - Honeywell IntuVue RDR-4000 Pilot's Manual

CP-2B CONTROL PANELS

ELECTRONIC FLIGHT DISPLAY

Equipment Description
28
IntuVue RDR-4000 Weather Radar Pilot's Guide
The CP-2B contains all controls for operating
the radar system except those located on
display units or electronic flight display
control panels. The CP-2B is used in both
single and dual system configurations.
The RDR-4000 has the ability to show two
different radar display views simultaneously.
The left side of the control panel controls the
left side display (Captain) and the right side of
the control panel controls the right side
display (First Officer). The flight crew can
operate each side independently without
impacting radar performance, thus achieving
maximum weather information display. The
one GAIN control knob affects both displays.
The control panel for installations that include
the Hazard Display Features uses
pushbuttons for engaging or disengaging the
turbulence and hazard display features.
These control panels also use different
names for some of the mode labels. See
CONFIGURATIONS on page 5.
The Electronic Flight Display is not part of the
RDR-4000 system, but it is where the radar
mode or status, weather returns, windshear,
turbulence, and ground map data are
displayed. This picture is intended as an
example only. Your equipment may vary.
D201002000008
Rev 1, December 2014