Graphical Metars Not Available, Data Not Received; Metars Available In Selected Area; Fis Alert, Fis Data Not Received For 15 Minutes - Honeywell KMD 550/850 Pilot's Manual Addendum

Multi-function display
Table of Contents

Advertisement

Messages
GRAPHICAL METARS
NOT AVAILABLE,
DATA NOT RECEIVED
If no valid METAR data is
received a message such as
that shown in Figure 61 will
be displayed.
This message usually means
that the system is not in FIS
coverage.
The message can also occur
while in FIS coverage if not all
of the data for a weather
product has been received.
NO METARS AVAIL-
ABLE IN SELECTED
AREA
A message such as that
shown in Figure 62 will be
displayed if no METARs are
available in the selected
area.
This message means that the
FIS system is working prop-
erly, there are simply no
reports of the selected mode
within the area.
FIS ALERT, FIS DATA
NOT RECEIVED FOR
15 MINUTES
This message will be dis-
played (Figure 63) if FIS data
has previously been received,
but it has been 15 minutes or
more since the last reception. The message can be cleared by pressing
the OK softkey. The message will not appear again unless data is again
received then again lost for 15 minutes.
Revision 2 Nov/2002
Figure 61
Figure 62
Figure 63
44
KMD 550/850 FIS Addendum

Advertisement

Table of Contents
loading

Table of Contents