Remove The Rear Skin - Christie Solaria One Service Manual

7. Remove the four screws that secure the skin to the corner brackets.
8. Remove the five screws from the bottom edge of the skin.
9. Pull the cardcage panel out.
3.10

Remove the Rear Skin

The rear access frame interlocks with the side skins.
1. Turn the lamp off and cool the projector for at least 15 minutes.
2. Turn the projector off and then disconnect it from AC power.
3. Remove the top lid. See
4. Remove the touch panel controller (TPC). See
5. Remove the safety shield. See
6. Remove the 2 screws securing the TPC harness to the rear skin.
+
Solaria One/Solaria One Service Manual
020-101039-02 Rev. 1 (06-2013)
Remove the Top Lid on page
Remove the Touch Panel Controller on page
Remove the Safety Shield on page
Section 3: Parts and Module Replacement
3-4.
3-9.
3-5.
3-7