Christie Solaria One Service Manual page 66

Section 3: Parts and Module Replacement
10. Remove the 4 screws from the bottom of the IOS.
11. Lift the light engine enclosure and the IOS out of the projector housing.
When reinstalling the IOS, you must complete these tasks:
a. Adjust the aperture shadows.
b. Reshoot the MCGD.
c. Verify the TCGD correction.
d. Create new screen files.
e. Verify the brightness uniformity.
12. Remove the 4 screws securing the IOS to the light engine enclosure.
3-38
+
Solaria One/Solaria One Service Manual
020-101039-02 Rev. 1 (06-2013)