Yellow Notch Filter Color Calibration - Christie Solaria One Service Manual

Section 2: Adjust the Image
7. Check the screen each time an adjustment is made. The right-side adjustments affect the top right and
bottom left points on the screen. Once both cross hairs are in focus lock the set screw for right boresight.
8. Repeat Steps 5 to 7 for the left-side.
9. Each corner of the screen should be equally in focus when horizontal boresight is completed correctly. If
necessary, repeat vertical boresight. Only adjust vertical boresight 1/8 of a turn or less at one time to
maintain optimal lens performance (i.e. factory setup of absolute lens distance to the prism). It is critical
that each turn of the cap screws is tracked to ensure adjustments are accurate.
2.5

Yellow Notch Filter Color Calibration

UV HAZARD! When servicing the projector with the top lid removed anyone within the
immediate vicinity must wear safety glasses with side shields.
Complete this procedure whenever the yellow notch filter is moved or replaced, or when a new IOS
(Illumination Optics System) is installed.
1. Set up a spectroradiometer in front of the viewing screen and aim it at the center of the screen.
2. Create an MCGD file:
a. Tap Menu > Advanced Setup > MCGD File Setup.
b. Tap Save As.
c. Enter a name for the MCGD file in the Filename field and then tap OK.
d. Tap the option button in the red area of the chromaticity image to display the red test pattern.
e. Measure the red chromaticity with a spectroradiometer.
f. Record the red chromaticity value.
g. Repeat steps d to f for the green, blue, and white chromaticity measurements. Select the test pattern
that matches the color you are measuring.
h. Enter the chromaticity measurements you recorded in step f in the red, green, blue, white, and black x
and y fields.
i. If the MCGD file will be associated with a 3D channel, tap Enable 3D and select a frame rate in the
Frame Rate N:M list.
j. Tap Save.
3. Create a channel that includes the new MCGD file:
2-6
+
Solaria One/Solaria One Service Manual
020-101039-02 Rev. 1 (06-2013)