Removing The Rear Skin - Christie CP2208 Service Manual

6. Remove the five screws from the bottom edge of the skin.
7. Pull the card cage panel out.

Removing the rear skin

The rear access frame interlocks with the side skins.
1. Turn the projector off and then disconnect it from AC power.
2. Remove the top lid. See
3. Remove the touch panel controller (TPC). See
34.
4. Remove the safety shield. See
5. Remove the two screws securing the TPC harness to the rear skin.
6. Remove the five screws from the bottom edge of the skin.
7. Remove the screw from the AC receptacle.
CP2208 Service Manual
020-101917-01 Rev. 1 (11-2015)
Removing the top lid
Removing the touch panel controller
Removing the safety shield
Parts and Module Replacement
on page 33.
on page 39.
on page
37