Christie Solaria One Service Manual page 24

Hide thumbs Also See for Solaria One:
Table of Contents

Advertisement

Section 2: Adjust the Image
c. Tap DC2K Framing.
2. Turn the zoom adjustment ring on the lens until the entire outer edge of the test pattern frame fits the
screen.
3. Verify one color at a time.
4. Look for "twist" using the center vertical and horizontal lines – scan from one side of the screen to the
other, observing any change in vertical position of the color in question relative to the point where you
started. In this example, red is twisted counter-clockwise and blue is high and to the left with no apparent
twist.
Number
1
2
3
4
5
2-12
Location
Top Center
Note Yellow to the right, Magenta/Blue to the left, and Yellow in the
middle. This shows that Blue is separated from Green to the left. Blue
above shows that Blue is higher than both Green and Red.
Center
Shows that Blue is high and to the left and Red is twisted.
Right
Note Blue to the left, Yellow to the right, and White in the
middle.This shows that Blue is separated from Green to the left.
Compare to the left, where Magenta is to the top on the right, Red is
on the bottom to the left. This is evidence of counter-clockwise twist
in Red and that Blue is high.
Bottom Center
Note Blue to the left, Yellow/Red to the right, Cyan in the middle.
This shows that Blue is separated from Green to the left and upward.
Compare with Top Center where Red is to the right on the bottom, to
the left on the top. This is evidence of counter-clockwise twist.
Left
Note Blue to the left, Yellow/Red to the right, and White in the
middle. This shows that Blue is separated from Green to the left.
Compare to the right, where Red is to the bottom on the left, Magenta
is on the top to the right. This is evidence of counter-clockwise twist
in Red and that Blue is high
Description
Solaria One/Solaria One
+
Service Manual
020-101039-02 Rev. 1 (06-2013)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Solaria one+

Table of Contents