Back Up Projector Settings And Information; Restore A File; Restore Factory Default Settings; Move Files To The Projector - Christie Solaria One Service Manual

Section 4: Backup, Restore, and Upgrade Projector Files
4.4

Back up Projector Settings and Information

You need Service permissions to complete this procedure.
1. Tap Menu > Service Setup > File Management.
2. Tap Backup.
4.5

Restore a File

You need Service permissions to complete this procedure. You can restore configuration, preference, channel,
user, and ICP files.
1. Tap Menu > Service Setup > File Management.
2. Tap Browse to the right of the File to restore field.
3. Select the location of the upgrade file in the Drive Letter list.
4. Browse to the location of the upgrade file in the Folder list.
5. Tap the upgrade file and then tap Open.
6. Select the type of file to restore in the Select type list.
7. Tap Restore.
8. Tap Yes.
4.6

Restore Factory Default Settings

You need Service permissions to complete this procedure. You can restore configuration, preference, channel,
and user files.
1. Tap Menu > Service Setup > File Management.
2. Select a file type to restore in the Select type list.
3. Tap Reset Defaults.
4. Tap Yes.
4.7

Move Files to the Projector

You need Service permissions to complete this procedure.
1. To move files from a USB Flash drive, insert the USB flash drive into the USB port on the side of the touch
panel controller (TPC).
2. Tap Menu > Service Setup > File Maintenance.
3. Select a file type in the File Type list.
4. Tap and drag a file from the TPC Files pane to the Projector Files pane.
4-2
+
Solaria One/Solaria One Service Manual
020-101039-02 Rev. 1 (06-2013)