Cisco ASA 5505 Configuration Manual page 549

Chapter 27 Configuring Network Object NAT
Figure 27-47
Configure static NAT for the load balancer:
Step 3
Figure 27-48
For the Translated Addr field, add a new network object for the static NAT group of addresses to which
Step 4
you want to translate the load balancer address by clicking the browse button
Add the new network object.
a.
Figure 27-49
Define the static NAT group of addresses, and click OK.
b.
OL-20339-01
Defining the Load Balancer Address
Configuring NAT
Adding a New Network Object for the Static NAT Group
Configuration Examples for Network Object NAT
Cisco ASA 5500 Series Configuration Guide using ASDM
.
27-27