Adding a WebtypeACL
Webtype ACLs are added to a configuration that supports filtering for clientless SSL VPN. This chapter
describes how to add an ACLto the configuration that supports filtering for WebVPN.
This chapter includes the following sections:
•
•
•
•
•
Licensing Requirements for Webtype ACLs
The following table shows the licensing requirements for this feature:
Model
License Requirement
All models
Base License.
Guidelines and Limitations
This section includes the guidelines and limitations for this feature:
•
•
•
Context Mode Guidelines
Supported in single and multiple context mode.
Firewall Mode Guidelines
Supported in routed and transparent firewall mode.
OL-20339-01
Licensing Requirements for Webtype ACLs, page 16-1
Guidelines and Limitations, page 16-1
Default Settings, page 16-2
Using Webtype ACLs, page 16-2
Feature History for Webtype Access Lists, page 16-5
Context Mode Guidelines, page 16-1
Firewall Mode Guidelines, page 16-1
Additional Guidelines and Limitations, page 16-2
C H A P T E R
Cisco ASA 5500 Series Configuration Guide using ASDM
16
16-1