Cisco ASA 5505 Configuration Manual page 602

Information About Service Policies
Table 29-1
Feature
Application inspection (multiple types)
CSC
IPS
NetFlow Secure Event Logging filtering
QoS input and output policing
QoS standard priority queue
QoS traffic shaping, hierarchical priority
queue
TCP and UDP connection limits and
timeouts, and TCP sequence number
randomization
TCP normalization
TCP state bypass
Supported Features for Management Traffic
Service policy rules support the following features for management traffic:
•
•
Feature Directionality
Actions are applied to traffic bidirectionally or unidirectionally depending on the feature. For features
that are applied bidirectionally, all traffic that enters or exits the interface to which you apply the policy
map is affected if the traffic matches the class map for both directions.
Cisco ASA 5500 Series Configuration Guide using ASDM
29-2
Service Policy Rule Features
Application inspection for RADIUS accounting traffic—See
for Management Application Protocols."
Connection limits—See Chapter 48, "Configuring Connection Settings."
Chapter 29
See:
• Chapter 36, "Getting Started With Application Layer
Protocol Inspection."
Chapter 37, "Configuring Inspection of Basic Internet
•
Protocols."
Chapter 39, "Configuring Inspection of Database and
•
Directory Protocols."
Chapter 40, "Configuring Inspection for Management
•
Application Protocols."
Chapter 38, "Configuring Inspection for Voice and
•
Video Protocols."
Chapter 55, "Configuring the Content Security and Control
Application on the CSC SSM."
Chapter 54, "Configuring the IPS Application on the
AIP SSM and SSC."
Chapter 72, "Configuring NetFlow Secure Event Logging
(NSEL)."
Chapter 49, "Configuring QoS."
Chapter 49, "Configuring QoS."
Chapter 49, "Configuring QoS."
Chapter 48, "Configuring Connection Settings."
Chapter 48, "Configuring Connection Settings."
Chapter 48, "Configuring Connection Settings."
Chapter 40, "Configuring Inspection
Configuring a Service Policy
OL-20339-01